|
"After a month of building up road crud, the side of the [car]
treated with RejeX came clean with one swipe of the sponge..."
Read the complete story
here.
"On paint in good condition, it eliminates the need for waxes, and
one application will last up to 12 months."
"This is pretty cool stuff and I highly recommend it. I'm always
amazed when one of the smaller companies trumps the big guys, and
this is a classic example. I have no idea how they did it, but
Corrosion Technologies has come up with a winner!"
Read the complete story here.
"What makes RejeX stand out from other polishes is not just its
ability to keep the boat cleaner longer, but the fact that it
works on just about every non-porous surface."
Read the
complete story here.
"We were
impressed with this product's ability to keep bug splats and
exhaust stains from sticking to paint."
Read the complete story here.
"It seals
against most stains, requiring just a splash-down with little or
no rubbing. A solution like this is worth the retail price."
"Lasts longer than any wax job."
Packaged in convenient 16 oz.
and 1 gallon containers
|
SPACE AGE PROTECTION FOR YOUR CAR, TRUCK, BOAT, RV,
AIRPLANE & MOTORCYCLE
RejeX is a thin-film polymer coating designed to
provide a high-release surface. This very thin film – less than a
micron thick – prevents stains and adhesion of common contaminants
such as exhaust, bugs, oil, tree sap, bird droppings, road grime,
brake dust, etc. It also makes graffiti easy to remove and can be
applied to windshields to repel rain. It’s easy to apply and
produces a deep, lustrous shine that outlasts the most popular
waxes by months.
RejeX contains none of the free silicone oils found in
some other products that are known to contaminate paint and cause
problems when repainting.
APPLICATION
RejeX should be applied to a cool (less than 85° F) dry
surface out of direct sunlight. If the surface is too hot, the
coating will cure before it has properly bonded to the surface,
and it won’t perform up to its potential. RejeX is wiped on,
allowed to dry to a haze for approximately 20 minutes, wiped off,
then allowed to cure for 12 hours.
Curing
is required to allow the monomers (polymer building blocks) that
make up RejeX to attach to the surface being treated and to
polymerize (crosslink) into a crystal-clear, impervious film.
It is very important to allow RejeX to cure for 12 hours
after the haze has been wiped off. If the coating is
exposed to contamination such as oil, fuel, soot, water, cleaners,
etc. before it has cured, the contaminants may interfere with the
film, preventing the RejeX from achieving it's maximum performance
and durability.
PROTECTS AND BEAUTIFIES PAINTED METAL, GLASS,
ACRYLIC, GEL COAT, FIBERGLASS, GLOSSY PLASTIC & POLISHED METAL
SURFACES
RejeX is not meant to be used on porous surfaces, highly oxidized
painted surfaces, or to fill fine scratches. RejeX can be applied
in multiple coats, allowing 8 hours curing time between coats for
deeper color and greater depth of gloss. RejeX has a
higher refractive index than waxes, so it produces
richer, deeper looking colors and a lustrous long-lasting finish.
RejeX
can be used over existing wax; however, the duration of protection
will be reduced as the softer underlying wax degrades
comparatively quickly. There is no reason to wax over
RejeX. As we’ve already said, RejeX leaves a shinier,
longer-lasting finish than wax… and the wax can't adhere well to
RejeX!
If a
RejeX-treated surface needs repainting, normal paint preparation
is all that’s required. Abrasive cleaners, polishes, rubbing
compounds or chemical paint strippers will remove the RejeX film.
INSTRUCTIONS
-
Shake well and apply to a clean, dry surface that is cool to the
touch. Do not apply in direct sunlight or in temperatures
greater than 85° F.
-
After RejeX dries to a haze (about 20 minutes), simply wipe it
off. Unlike waxes that require strenuous rubbing or buffing to
remove, RejeX easily wipes on and off.
-
Allow RejeX to cure for 12 hours out of the elements.
-
For optimum protection, reapply every 4-6 months as needed.
FREQUENTLY ASKED QUESTIONS
(click here)
RejeX is NOW AVAILABLE at participating*
Ask for it by name. Accept no substitutes.
*PLEASE NOTE: Not all products are available at every dealer.
Please check your local store or contact your area
distributor.
 |
Downloading our Material Safety Data Sheets (MSDS) requires
the Acrobat Reader plug-in. Download it for free by clicking
their logo. |
|
